SnapSwap™ Toolchanging System
Four preloaded toolheads allow U1 to directly switch between colors or materials in approximately five seconds.
Snapmaker U1
Back to School SALE!
See in store for exclusive offer.
Valid for Manitoba residence only.
Snapmaker U1
Make More.
Waste Less.
The Consumer Toolchanger 3D Printer
Four independent toolheads bring fast multi-color and multi-material printing together with minimal purge, automatic calibration and intelligent print monitoring.
4
Independent Toolheads
5 sec
Direct Toolhead Swap
500 mm/s
Maximum Toolhead Speed
270³ mm
Build Volume
Get the Highlights
Four Toolheads.
More Possibilities.
Snapmaker U1 uses four independent toolheads instead of routing several filaments through one shared nozzle. That means faster material changes, less purging and more freedom when combining colors and material types.
Up to 85% Less Waste
Direct toolhead swaps dramatically reduce the purge material normally required during multi-color printing.
High-Speed CoreXY
Print at speeds up to 500 mm/s with acceleration reaching 20,000 mm/s².
True Multi-Material Printing
Combine rigid and flexible materials, create soluble supports or print several colors without repeatedly unloading and reloading filament.
Smart Calibration
Automatic bed leveling, toolhead alignment, pressure advance and input shaping simplify setup.
5s
Direct Toolhead Swaps. Built for Speed.
Every material stays loaded in its own dedicated toolhead. Instead of unloading one filament, loading another and purging the remaining plastic from a shared nozzle, the U1 changes the entire toolhead.
TOOLHEAD 01 PLA
TOOLHEAD 02 PETG
TOOLHEAD 03 TPU
TOOLHEAD 04 Support
85%
Less Filament Waste
By switching dedicated toolheads instead of flushing a shared nozzle every time the color changes, U1 can dramatically reduce purge waste during multi-color jobs.
Multi-Material.
Endless Possibilities.
Use independent toolheads to pair different filament properties in one project. Combine rigid structures with flexible sections, use soluble support materials or mix multiple colors without cross-contamination.
PLA
Reliable general-purpose printing with excellent detail and easy handling.
PETG
Strong and impact-resistant material suitable for functional components.
TPU
Add flexible sections, grips, hinges and soft-touch components to your designs.
PVA
Water-soluble support material for complex geometry and difficult overhangs.
Precision & Simplicity
Smart Where It Matters.
01
Automatic Toolhead Alignment
U1 automatically calibrates the positioning of all four toolheads so colors and materials stay accurately aligned.
02
Automatic Bed Leveling
Mesh bed leveling compensates for variations across the print surface for a consistent first layer.
03
AI-Assisted Monitoring
The built-in camera can monitor print progress and help detect common failures such as spaghetti printing and workspace obstructions.
04
Automatic Filament Management
Auto-loading, filament runout detection, compatible RFID recognition and Backup Mode help reduce interruptions.
Technical Details
Specifications
Printing Technology
Fused Deposition Modeling
Build Volume
270 × 270 × 270 mm
Toolheads Included
4
Maximum Toolhead Speed
500 mm/s
Maximum Acceleration
20,000 mm/s²
Maximum Nozzle Temperature
300°C
Nozzle Diameter
0.4 mm
Filament Diameter
1.75 mm
Maximum Heated Bed Temperature
100°C
Standard Material Support
PLA, PETG, TPU, PVA and PCTG
Printer Dimensions
584 × 499 × 730 mm
Weight
18.2 kg
Four Toolheads.
One Powerful Printer.
Print faster, combine materials and create detailed multi-color projects with dramatically less filament waste.
Explore Snapmaker U1